PRiMEL 600® BETOKONTAK
Adherence Enhancing Synthetic Resin Dispersion Primer
APPLICATION FIELD
Used as adherence increasing primer on ceramic surfaces and fair faced concrete walls and ceilings.
REQUIREMENTS
- Improves adhesive strength of the plaster.
- Prevents contraction cracks of the plaster.
- Used for priming applications on ceramics.
- Increases the application time of plaster by preventing rapid loss of water.
- Provides ease of application.
- Allows savings from labour.
TECHNICAL VALUES
| Density, g/cm³ | ~ 1,5 |
| Colour | Pink |
| pH | Between 7.0-9.0 |
| Application Thickness, (mm) | Max. 3 |
| Adhesion Strength N/mm2 | > 1,0 |
| Drying Time, min. | 60-120 (20 °C and 50% relative humidity) |
| Temperature Strength, °C | -20 °C – +80 |
APPLICATION
SURFACE PREPARATION
The surface shall be dry, clean and free of oil.
PREPARATION of the MORTAR
- Shall be mixed at a ratio of 1/3 for flush applications;
1.6 Kg Water/5 kg PRIMEL 600® BETOKONTAK
4 Kg Water/12 kg PRIMEL 600® BETOKONTAK
- At a ratio of 1/5 for applications over ceramics;
1 Kg Water/5 kg PRIMEL 600® BETOKONTAK
2.4 Kg Water/12 kg PRIMEL 600® BETOKONTAK
Specified water amounts are maximum values, and it may be used as thicker when required.
- PRIMEL 600® BETOKONTAK and specified amount of water shall be mixed until the mixture becomes homogeneous.
- Primer mixed with water shall be stirred from time to time during application. PRIMEL 600® BETOKONTAK is applied to the surface with a roll or a brush.
- Plaster is applied when material is hardened so that it is not possible to scratch it from the surface with nail.
CONSUMPTION
- 200 g/m² (at a ratio of 1/3)
- 335 g/m² (at a ratio of 1/5)
PACKAGING
1 kg plastic drums
5 kg plastic drums
12 kg plastic drums
STORING
1 Year Shelf Life*
*Kuru ve don tehlikesi olmayan ortamda açılmadan orijinal ambalajında, kapalı ve direkt güneş ışığından uzak yerlerde
CERTIFICATE OF CONFORMITY
TS 13744/ Mart 2017 / Sınıf 1
Dolgu malzemeli aderans arttırıcı astar
RECOMMENDATION
- We recommend that the application shall be performed between +5°C and +35°C.
- Shall be used within 3 days after mixing with water provided that its package is closed.
- The application surface shall be dry, clean and free of dust.
- It shall be protected from freezing.
- All tools used shall be washed with water after application.
- When inhaled, it is harmful to health.
- Keep away from the children.
- Keep it in a container that is closed tightly.
- Avoid contact with eye and skin.
- Contact us for your technical questions and for your questions about all other application conditions.