Alçımatik

ALÇIMATİK®

Gypsum-Based Ready-Mixed Machine Applied Plaster

First Gypsum-based Machine Plaster Produced in Turkey

APPLICATION FIELD

on interior faces of the buildings.

REQUIREMENTS

TECHNICAL VALUES

Compressive Strength, N/mm²	≥ 2,0
Bending Strength, N/mm²	≥ 1,0
Adherence Strength (Under Dry Conditions), N/mm²	≥ 0,3
Initial Setting Period, minutes	> 50
Reaction to Fire	A1

APPLICATION

SURFACE PREPARATION

The surface will always be free of form oil, dust, paint and materials that reduce adherence.
Repair of the cracks and holes should be made using appropriate Entegre Repair Mortars before application.
Application surface should be dampened with water, if required. PRİMEL 600® BETOKONTAK is used for adherence increasing primer before application on bright fair faced surfaces, concrete ceilings and walls.
You can advance to application when the surface is cured.

PREPARATION of the MORTAR

ALCIMATIK^® should be mixed with ready-mix plaster mixer (15-16 l water/35 kg bag) and sprayed to the surface.
Application thickness should be between 1 cm and 2.5 cm in one coat.
If the thickness is more than 2.5 cm, a second coat is applied in max. 2.5 cm thickness before the first coat is set.
Surface must be levelled.
When the surface starts to be dried, excess parts on the surface may be removed with a second levelling operation.
Then, compaction and smoothing is performed with a scraper.
When the surface reaches the adequate hardness, it should be lightly dampened and smoothed with a sponge and satin surface should be removed.
A perfect surface is achieved by finishing with steel trowel when the satin on the surface starts to be dried depending on the ambient temperature.
After about 2 hours, the hardened surface will be lightly dampened and operation will be completed by finishing with steel trowel.

CONSUMPTION

Approx. 10.0 kg/m² for 1 cm of plaster thickness

PACKAGING

35 kg’lık PP bag,

(delivered in pallets or as sling-bags upon request.)

STORING

6 Months Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

(1 week after opening the package.)

CERTIFICATE OF CONFORMITY

TS EN 13279-1 February 2009 / B4-50-2.0

Ministry of Public Works Pos. No: 04.475/B

RECOMMENDATION

No other materials (lime, cement, gypsum, etc.) should be added to the prepared mortar.
We recommend the application to be performed between +5°C and +35°C.
ALCIMATİK® will be protected against quick drying under windy weather conditions.
You should wait at least 10 days for the application be performed on the ALCIMATIK® depending on the ambient temperature.
We recommend using fiberglass meshs on the joining areas of different materials and on the points that may be considered to be moving.
Do not go beyond the application field and the rules.
Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
For detailed information, please request the safety data sheet.
Contact us for your technical questions and for your questions about all other application conditions.